
Frequency capping limits how often Google shows your ad to the same person, and Google offers it for Display and Video campaigns only. If you keep running into your own ad, or a report shows a frequency number you do not understand, the first job is to find out which type each of your campaigns is.
Demand Gen has no advertiser cap, because Google says its system automatically controls impression frequency. Google's pages list no cap setting for Search or Performance Max. Where a cap exists, it applies to signed-in users, or to devices when someone is signed out, so it limits delivery rather than counting one person exactly.
Check the campaign type, open the setting where it exists, and read the report before you change anything. If your audience is one town or a small remarketing list, repeats are likely, and a tighter cap can cut how often your ads run at all.
Key Takeaways
Google offers frequency capping in Display and Video campaigns. Demand Gen has no advertiser cap, and Google lists no cap setting for Search or Performance Max.
Display uses Additional settings, then Frequency management. Video uses Additional settings, then Frequency capping, set at campaign level only.
Frequency figures can take up to three days to appear, come from statistical models, and can be missing for small campaigns.
Compare reach, unique users, conversions and spend over one date range before lowering a cap, because a small audience can lose delivery.
Find out in a minute which of your campaigns can be capped
Open Campaigns in your Google Ads account and look at the type of each one. As of November 2026, Google's help page says you can use frequency capping in Display campaigns and Video campaigns, and that it isn't supported in Demand Gen campaigns. That one glance settles most of the guessing about where to look.
The table below puts the campaign types side by side. The reporting column is a separate matter: Google's reach and frequency page lists frequency data for Display, Demand Gen, Video and App campaigns, so you can see Demand Gen frequency without being able to cap it.
| Campaign type | Advertiser frequency cap | Where to look |
|---|---|---|
| Display | Yes | Additional settings, then Frequency management |
| Video | Yes | Additional settings, then Frequency capping |
| Demand Gen | No, Google controls frequency automatically | Reach and frequency reports |
| Search | Google lists no cap setting | Not in the Brand Report |
| Performance Max | Google lists no cap setting | Not in the Brand Report |
If most of your spend sits in Search or Performance Max, there is no cap to set, and repeat exposure there is not something this setting can fix. Whether Performance Max suits a small account at all is its own question, and our post on Performance Max for a small business covers it.

Set a Display cap, or leave Google's optimization on
For a Display campaign, go to Campaigns, then Settings, choose the Display campaign, open Additional settings and select Frequency management. You get two choices. You can let Google Ads optimize how often your ads show, which Google recommends, or you can set your own cap. A custom cap can only be set once the campaign exists, so build the campaign first and save when you are done.
A Display cap counts impressions, per day, week or month, and it can sit at campaign, ad group or ad level. Google's definition page says third-party cookies are used by default, and first-party cookies approximate impressions when third-party cookies are unavailable. So, a Display cap is a limit on delivery, not a precise count of one human.
Remarketing deserves a note of its own. Google's remarketing setup guidance for product feeds says to use an automated bidding strategy to automate frequency caps toward the best performance. If your remarketing list is the reason repeats worry you, our post on Google Ads remarketing covers how those audiences work.
Cap YouTube and other Video ads by impressions, views or both
For a Video campaign, open Additional settings and find Frequency capping. You can choose Cap impression frequency, Cap view frequency, or both. Each takes a whole number, per day, week or month, and Google says Video caps can only be set at the campaign level. You can set one when you create the campaign or come back to it later.
Video caps apply to signed-in users, or to devices if the user is signed out. An impression cap limits how often the ad is served. A view cap limits how often the same person watches it, which matters if your goal is people who actually watch rather than people who scroll past.
One more term can look like a cap and is not one. In video campaign groups, a frequency cap is a hard limit on how many times a user can be served ads, while a frequency target is an optimization goal for average frequency, not a strict per-user cap. Google's weekly target of 3 applies to video campaign groups only, so it is not a number to copy into a single campaign.

Your ten-minute check
- 1
Minutes 1 to 2
Open Campaigns and write down the type of each one: Display, Video, Demand Gen, Search, Performance Max or App.
- 2
Minutes 3 to 5
For each Display campaign, open Additional settings, then Frequency management, and note whether Google's optimization or a custom cap is on, at which level, and per day, week or month.
- 3
Minutes 6 to 8
For each Video campaign, open Additional settings, then Frequency capping, and note whether it caps impressions, views or both.
- 4
Minutes 9 to 10
Pick one date range that ends at least three days ago, then write down reach, unique users, conversions and spend for each capped campaign.
Read your frequency reports without chasing a wrong number
Frequency reporting is often where a repeat-ad worry starts, so it helps to know what the figures can and cannot show. Google says it typically takes up to three days for reach and frequency metrics to appear, so a report you pull this morning may not include the last few days. The metrics are modeled with statistical models, which makes them estimates.
Figures can also be missing. Google says they may not appear when a minimum threshold of impressions and unique users is not met, so a small or new campaign can show blanks for a while. That is a reporting limit and not a sign the cap failed.
Compare frequency with a cap only over a matching period, and read it next to reach, unique users, conversions and spend. A frequency number on its own does not say whether the campaign is wasting money. It says how many times the average person in the report saw the ad, and you still have to decide what that means for your results.

Decide whether your small audience needs a tighter cap
If the account is simple and results are steady, Google's optimization can stay on and nothing needs to change. Google's own advertising tips recommend frequency capping for Display and Video so people are not overexposed to your ad, and that is the reason to look. It is not a reason to lower a number the moment a report looks high.
When repeated exposure does look wasteful, work through the cause before you touch the cap. One audience may be too small, one creative may be running far longer than the rest, or two campaigns may be reaching the same people. A small remarketing list or a single-town audience makes repetition likely by itself, and a tighter cap can then cut how often your ads run at all.
Before you lower a cap
Confirm the campaign is Display or Video, since other types have no cap to lower.
Use one date range for every figure, ending at least three days ago.
Put reach, unique users, conversions and spend side by side.
Look at the audience, the creative and overlapping campaigns before the cap itself.
Change one thing at a time and write down the date, so you can tell what moved.
Facebook ads count frequency on their own terms, and our post on Facebook ads frequency covers that side if you run both. Keep the two sets of numbers apart when you compare them.

Know when a second set of eyes saves money
Checking the setting is a ten-minute job you can do yourself, and a simple account may need nothing more. Outside help earns its place when the problem is wider than one setting.
That means campaigns that overlap and reach the same people, an audience so small that any cap strangles delivery, conversions that are not being recorded so you cannot tell whether repeats produce sales, or reports that disagree with the caps you set. In those cases, the useful work is diagnosis and measurement, and the right answer may still be to leave the setting alone.
Do you know where your frequency cap lives?
Pick an answer to begin.
1. Which Google Ads campaign types does Google list for frequency capping?
2. Where is a Video frequency cap set?
3. Your Display report shows a high frequency figure. What should you do first?
Frequently Asked Questions About Frequency Capping in Google Ads
What is frequency capping in Google Ads?
It limits how often Display or Video ads appear to the same person, counted per day, week or month. Google applies it to signed-in users, or to devices when users are signed out.
Which Google Ads campaigns offer a frequency cap?
Google says you can use frequency capping in Display campaigns and Video campaigns. It is not supported in Demand Gen campaigns, and Google's pages list no cap setting for Search or Performance Max.
Can I cap frequency in Demand Gen?
No. Google's Demand Gen FAQ says the system automatically controls impression frequency. You can see reach and frequency figures for Demand Gen in reports, but you cannot set a cap.
Where is the frequency setting for Display and Video?
For Display, open Settings, then Additional settings, then Frequency management. For Video, open Additional settings, then Frequency capping, and choose Cap impression frequency, Cap view frequency or both.
How long do Google Ads frequency reports take to appear?
Google says reach and frequency metrics typically take up to three days to appear. They are modeled, and they can be missing when a campaign does not meet the minimum threshold of impressions and unique users.
Should a small business set a frequency cap?
Check the campaign type first, then compare reach, unique users, conversions and spend over one matching date range. If results are steady, Google's optimization can stay on. A small audience can lose delivery under a tighter cap.
Final Thoughts
Frequency capping in Google Ads is a setting for Display and Video campaigns. Demand Gen controls frequency on its own, and Google lists no cap setting for Search or Performance Max. For Display, the setting sits under Additional settings, then Frequency management. For Video, it sits under Frequency capping, at campaign level.
Once you know which of your campaigns can be capped, you can stop hunting for a setting that is not there and spend your time on the numbers that matter: reach, unique users, conversions and spend, read over one matching date range. Leaving Google's optimization on is a fair decision when results are steady, and a tighter cap is worth testing only after you have checked the audience, the creative and overlapping campaigns.
If you want a second set of eyes, Web Leveling can look through your campaigns with you, check that conversions are recorded, and tell you plainly whether a cap would help or hurt. Our Google Ads management work starts with that kind of review. We work with small and medium businesses across the country and overseas. Send us a note about your campaigns, and we will help you read what your reports show.
Terms
Google Ads frequency words in this post
Tap a term to see what it means.
Frequency capping. A setting that limits how often your Display or Video ads appear to the same person.
Frequency. How many times, on average, the same person saw your ad in a report.
Reach. The number of unique people your ads were shown to.
Impression. One time your ad is shown.
Frequency target. An optimization goal for average frequency in video campaign groups, not a strict per-user cap.
Demand Gen. A Google Ads campaign type where Google automatically controls impression frequency.




